Aucun produit dans le chariot
Le test Babycheck-1® WB Swiss Point of Care est un test rapide d'auto-test pour la détermination de l'hCG (gonadotrophine chorionique humaine) dans un échantillon de sang total pour le diagnostic de grossesse.
Alors qu'une grossesse peut être détectée dans l'urine environ une semaine après une absence de règles, les analyses de sang total peuvent détecter une grossesse dès quelques jours après l'imprégnation.
Maximize your savings when you bundle more products! The more you buy, the more you save.
Pregnancy whole blood tests are also known to be more accurate than urine tests. This is the reason why whole blood/serum pregnancy tests are widely used in laboratories/hospitals.
In addition, the volume of ingested liquids which may affect the urine test results (dilution of hCG) is not affecting whole blood test. The test accuracy is indeed very important as a pregnancy necessarily implies precautions as well as a change in lifestyle such as stopping smoking or drinking alcohol, reducing or even eliminating medications as well as certain foods. It is possible to detect an hCG concentration of 25 IU/L.
For more information, please check Swiss Point of Care
| Per 100 | Per |
|---|
Steps:
1. Prepare the test device, the pipette and the diluent dropper vial. Take them out from the protective pouch (tear at the notch). Remove the screw cap of the diluent dropper vial and leave it nearby.
2. Clean the tip of the middle finger or ring finger with cotton wool moistened with alcohol. Press the lancet firmly against the side of the previously cleaned finger and press the release button.
3. Without pressing the bulb, put the plastic pipette in contact with the blood sample. The whole blood migrates into the pipette through capillarity to the line indicated on the pipette.
4. Dispense the blood into the sample well of the cassette, pressing down on the bulb of the pipette. Wait 30-40 seconds for blood absorption.
5. Unscrew the blue cap from the dropper bottle, keeping the white cap secure. Add 4 drops of diluent to the well, spacing each drop 2-3 seconds apart.
6. Read the result within 5 to 10 minutes. Do not interpret after 10 minutes.
Need help with your test?
Try our testing tool assistance.
